Product Details
ECO.40S+ Electrical Magnetic Drill Press by Euroboor®. The Euroboor ECO.40S+ magnetic core drilling machine with integrated motor cable, drills up to ø 40 mm (1-9/16") and fits cutters up to 110 mm (4-5/16") in length. Our portable ECO.40S+ magnetic core drilling machine benefits from an oil lubricated gearbox, but also from innovative electronics which offer more safety, significantly reduce the risk of damage of the machine, tool and workpiece and protects the user in case of excessive vibrations or sudden displacement. The lifespan is considerably longer and you avoid high maintenance costs.
Specifications
| Annular cutting: Ø 7/16" - 1-9/16" |
| Twist drilling: Ø 1/16" - 5/8" |
| Countersinking: Ø 3/8" - 1-3/4" |
| Length: 10-3/8" |
| Width: 7-1/16" |
| Height: 14-3/16" - 17-5/16" |
| Stroke: 5-11/16" |
| Weight(without power cord and handles): 23.1 lbs |
| Magnet (l x w x h): 6-5/16" x 3-1/8" x 1-5/8" |
| Magnetic force: 3,305 lbs |
| Motor power: 10.5 A |
| Total power: 10.9 A |
| Speed (no load): 600 rpm |
| Speed (load 10.5 A): 380 rpm |
| Spindle (Weldon): 3/4'' |
| Voltage: 110 - 120 V / 60 Hz |
Includes
- (1) ECO.40S+ magnetic drilling machine
- (1) Safety Guard
- (3) Handles
- (1) Hex Key 2.5 mm
- (1) Hex Key 4 mm
- (1) Hex Key 5 mm
- (1) Lubrication System
- (1) Safety Chain
- (1) Bottle (200 ml) of IBO.10 cutting oil
- (1) User Manual
- (1) Safety Ear Protection
- (1) Safety Goggles
- (1) Safety Gloves
Features
- Sensortec™ Magnet LED indicator: The control panel on your magnetic drilling machine is designed for maximum ease of use and safety. Here you can find the Magnet LED indicator, which tells you whether the magnetic force is sufficient enough to start your drilling job. There are two options: The LED indicator lights up GREEN when generated magnetic force is sufficient; The LED indicator lights up RED when generated magnetic force is insufficient due to: Surface not being flat; Workpiece not being magnetizable (e.g. aluminum); Workpiece is coated or painted; Workpiece is not thick enough
- Temptec™ 2-way magnet function: The 2-way magnet function is a protective function, in which the magnetic force is activated for 50% when the magnet is switched on and for 100% when the motor is also switched on. At half the magnetic force, the magnet sticks to the surface enough to hold the machine in position when not in use. This subsequently ensures that the machine uses less energy, generates less heat and therefore lasts longer
- Integrated motor cable: The frame of your magnetic drilling machine is designed for maximum safety and comfort. It is provided with an ergonomic handle and integrated motor cable. The integrated motor cable offers increased safety as the cable is completely incorporated in the frame. This prevents the user from getting caught in the cable and the cable from tearing or snapping off. It also prevents a lot of unnecessary repairs and therefore additional costs because the user can no longer lift and carry the machine by the motor cable, which often happens in practice
- Overheat protection: The overheat safety function is an all-time electronic temperature protection. If the temperature of the motor unit runs up to 70° C (158 °F) the motor unit will stop. After a few minutes it can be started again. This ensures that the machine will not overheat and prevents unexpected downtime and high repair costs
- GYRO-TEC safety: GYRO-TEC safety features a gyroscopic sensor which detects acceleration and displacement in any direction. The GYRO-TEC safety feature engages three seconds after the motor is started. Whenever the machine recognizes a sudden or unwanted movement the motor will be shut down automatically by the machine’s electronics. This safety functionality offers extra protection in various circumstances, such as: Sudden loss of magnetic force while in operation; Excessive vibration caused by incorrect drilling procedure, worn-out cutting tools, etc.; Sudden displacement of the workpiece to which the magnetic drilling machine is attached. By the motor shutting down automatically, risk of damaging or hurting the machine, tools, workpiece and operator is reduced
- Power fluctuation protection: When the frequency is too high (above 65 Hz) or too low (below 45 Hz), the motor will not start. If the frequency of the power supply falls outside the range during your drilling job, the motor will shut off automatically. The machine will work again normally when the normal frequency has been restored
- Power surge protection: Beyond the rated voltage, a machine with this feature is able to cope with voltage spikes up to 4,000 Volt (1-2μs)*, which could be caused by nearby welding activities. Depending on the height of the spike, it may be necessary to replace built-in fuses, the control unit or the power switch, but other valuable parts like the motor and magnet will be protected
- Carbon brush wear indicator: On top of the motor housing you will find an integrated LED light. Under normal circumstances this light is off. The LED light will start burning red when the carbon brushes are worn to a level where it is advised to replace them
- Automatic shut-off: When the carbon brushes are actually worn to a level where replacement is needed, the motor will be shut-off automatically. This prevents the armature from being damaged. During automatic shut-off, the integrated LED light is no longer lit
- Lightest Ø 40 mm magnetic drilling machine
- Oil lubricated one-speed gearbox
- Fits cutters up to 110 mm DoC
- High-efficiency motor with less heat generation
- High-accuracy capstan hub
- Direct spindle drive and integrated tool cooling and lubrication
- Integrated slide for high accuracy, enlarged lifecycle and minimal vibration
- Strong dual coil CNC machined magnet
- Reversible handles which enable you to change the operation side of the feed handles in confined spaces
- Reduced risk of damaging machine, tools and workpiece and hurting operator
- Suitable for use in areas and workplaces where power supply is of less quality
- Reduced risk of armature damage
- Reduced risk of control unit(s) damage
- Timely service notification to avoid additional cost by unexpected downtime or unnecessary part replacement
At Euroboor® believe, ever since founding in 1977, that it can be done differently. That a professional like you must be able to rely on a professional supplier. Which has led Euroboor to become a major player in the industrial world, with Euroboor own factory and several offices worldwide. All because Euroboor have always listened to Euroboor customers and to the demands from the market. Euroboor customers are the ones who use Euroboor tools every day. Therefore they are Euroboor key indicators when it comes to the development and production. To which the starting point is clear: good is not good enough! Euroboor always goes one step further. With Euroboor production methods and technical approach, it is Euroboor goal to develop lighter, stronger and more reliable tools. In addition, Euroboor test tools thoroughly from the start of the development process all the way up to production. Euroboor vision is focused on developing innovative portable tools that add value for Euroboor customers and facilitate them in their daily work. Euroboor never lose sight of sustainability, time savings and cost savings. Euroboor mission is always clear: exceeding customer's expectations by developing and providing premium and innovative portable drilling and cutting solutions.