Product Details
Industrial Multimeter by Fluke Electronics®. The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently. The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pas filter. The meter also captures intermittents as fast as 250 µS using Peak Capture. High-frequency, high-energy noise generated by large drive systems is blocked from your measurements with specially designed shielding.
Specifications
| Voltage DC: Maximum voltage 1000 V; Accuracy ±(0.05% + 1); Maximum resolution 10 µV |
| Voltage AC: Maximum voltage 1000 V; Accuracy ±(0.7% + 2) True RMS; AC bandwidth 20 kHz with low pas filter; 3 dB @ 1 kHz; Maximum resolution 0.1 mV |
| Current DC: Maximum amps 10 A (20 A for 30 seconds maximum); Amps accuracy ±(0.2% + 2); Maximum resolution 0.01 µA |
| Current AC: Maximum amps 10 A (20 A for 30 seconds maximum); Amps accuracy ±(1.0% + 2) True RMS; Maximum resolution 0.1 µA |
| Resistance: Maximum resistance 50 MΩ; Accuracy ±(0.2% + 1); Maximum resolution 0.1 Ω |
| Capacitance: Maximum capacitance 9,999 µF; accuracy ±(1% + 2); Maximum resolution 0.01 nF |
| Frequency: Maximum frequency 200 kHz; Accuracy ±(0.005% + 1); Maximum resolution 0.01 Hz |
| Duty cycle: Maximum duty cycle 99.9%; Accuracy ±(0.2% per kHz + 0.1%); Maximum resolution 0.1% |
| Temperature measurement: –200.0 °C – 1090 °C; –328.0 °F – 1994.0 °F; excluding probe |
| 80 BK temperature probe: –40.0 °C – 260 °C; –40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater |
| Conductance: Maximum conductance 60.00 nS; Accuracy ±(1.0% + 10); Maximum resolution 0.01 nS |
| Diode: Range 3 V; Resolution 1 mV; Accuracy ±(2% + 1) |
| Duty cycle range Accuracy: Within ±(0.2% per kHz + 0.1%) |
| Operating temperature: –20 °C to + 55 °C |
| Storage temperature: –40 °C to + 60 °C |
| Humidity (without condensation): 0% – 90% (0 °C – 35 °C); 0% – 70% (35 °C – 55 °C) |
| Operating Altitude: 2000 m |
| Battery Life: Alkaline ~400 hours typical, without backlight |
Includes
- Fluke 87V Industrial Multimeter
- TL75 Test Leads
- AC175 Alligator Clips
- Holster with tilt-leg, test lead storage
- 80BK Temperature Probe
- 9V Battery (Installed)
Features
- Identify complex signal problems fast
- Supports accurate measurements on VFDs using a low-pas filter
- Captures intermittents as fast as 250 µS with Peak Capture
- Easy-acces door for fast battery changes without breaking the calibration seal
- Analog bar graph for fast changing or unstable signals
- Large digit display with bright, two-level backlight for easier reading in low light
- Touch Hold keeps readings on display even after removing probes
Built to highest safety standards
- All the inputs in the 87V are updated to the third edition of the EN 61010-1 to CAT III 1000 V and CAT IV 600 V. The meter is designed to withstand spikes of more than 8000 V. You also benefit from an audible Input Alert warning if the test leads are placed in the incorrect input jacks for the measurement being made.
- The 87V has a removeable holster that also holds a test probe during testing for easier viewing. Relative mode lets you remove test lead resistance, improving accuracy of low-resistance measurements. To make your life even easier, the 87V fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks.
- The Fluke 87V is designed and built in the U.S. and comes with a lifetime warranty.
Fluke Electronics® Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.