General Tools

General Tools
  • General Tools® - 6" SAE Industrial Precision Flexible Steel Ruler
    General Tools® - 6" SAE Industrial Precision Flexible Steel Ruler (616)
    0
    # mpn4653583616
    6" SAE Industrial Precision Flexible Steel Ruler (616) by General Tools®. The #616 Industrial Precision Flexible Steel Rule with 5R Graduations can make very precise linear measurements. Whether you're a keen DIYer or a pro, this...
    Ultra-fine black graduationsPolished stainless steel finish
    $5.20
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 6" SAE Industrial Precision Flexible Steel Ruler with Pocket Clip
    General Tools® - 6" SAE Industrial Precision Flexible Steel Ruler with Pocket Clip (300/1)
    0
    # mpn4653583575
    6" SAE Industrial Precision Flexible Steel Ruler with Pocket Clip (300/1) by General Tools®. With Plastic sleeve. The #300/1 Industrial Precision Flexible Steel Rule can make very precise measurements.
    Ultra-fine black graduationsPolished stainless steel finish
    $2.41
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 6" SAE Industrial Precision Rigid Steel Ruler
    General Tools® - 6" SAE Industrial Precision Rigid Steel Ruler (676)
    0
    # mpn4653583621
    6" SAE Industrial Precision Rigid Steel Ruler (676) by General Tools®. Whether you're a keen DIYer or a pro, this practical tool is great to have at hand in your toolbox. Designed with key attention to detail, it will let you carry out...
    Ultra-fine black graduationsPolished stainless steel finish
    $6.19
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 6" SAE Steel Divider Caliper
    General Tools® - 6" SAE Steel Divider Caliper (450-6)
    0
    # mpn4653583589
    6" SAE Steel Divider Caliper (450-6) by General Tools®. The #450-6 6 In. Divider Caliper can measure inside and outside dimensions. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this...
    Legs made of special caliper steel, with hardened measurement pointsHardened and tempered bow springs and fulcrum spools assure uniform tension without side play
    $12.73
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 6" SAE and Metric Depth and Angle Gauge
    General Tools® - 6" SAE and Metric Depth and Angle Gauge (444)
    0
    # mpn4653583808
    6" SAE and Metric Depth and Angle Gauge by General Tools®. The #444 Depth/Angle Gage precisely measures the depth of small holes and slots. It also works as a protractor to facilitate setting an angle to 30°, 45° or 60° on either...
    Etched stainless steel rule and hardened steel baseSpring tension nut simplfies operation by securing graduated stainless steel rule in milled slot at 90° angle to base
    $15.02
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 6" x 12 TPI Hack Saw Frame
    General Tools® - 6" x 12 TPI Hack Saw Frame (864)
    0
    # mpn4686471023
    6" x 12 TPI Hack Saw Frame by General Tools®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers in mind. It will meet your needs and deliver...
    Heat-treated blade suitable for cutting metalReversible blade for push or pull cutting
    $5.03
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 6-piece Drill Stop Set
    General Tools® - 6-piece Drill Stop Set (S838)
    0
    # mpn4653583871
    6-piece Drill Stop Set by General Tools®. The #S838 Drill Stops, Six Assorted prevent excessive penetration of twist and brad point drill bits. This top-grade product is expertly made in compliance with stringent industry standards to...
    Positive depth control assures identical hole depths on successive jobsMade of cold rolled steel, with a black oxide finish
    $4.52
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 8" 1.25" Round Short Telescoping Inspection Mirror
    General Tools® - 8" 1.25" Round Short Telescoping Inspection Mirror (555)
    0
    # mpn4632016011
    8" 1.25" Round Short Telescoping Inspection Mirror by General Tools®. Round Glass Inspection Mirror makes it possible for toolmakers, assemblers, inspectors and mechanics to see deep inside inaccessible workpieces and machines.This...
    These mirrors facilitate inspection of inaccessible workpieces and machines by toolmakers, assemblers, inspectors and mechanicsFully polished glass mirrors are enclosed in plated holders which are attached to knurled handles with ball and socket joints
    $7.20
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 8-7/16" Two Point Scriber
    General Tools® - 8-7/16" Two Point Scriber (80)
    0
    # mpn1452565914
    8-7/16" Two Point Scriber (80) by General Tools®. The #80 Fixed Two Point Scriber is preferred by machinists, engravers, mechanics and craftspeople for use on metal, glass, plastics and ceramics. Marking tools are one of the most...
    Aluminum body with knurled finger grip and two interchangeable threaded steel pointsShort straight and short 90°
    $3.60
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Adjustable Trammel
    General Tools® - Adjustable Trammel (523)
    0
    # mpn4653583813
    Adjustable Trammel by General Tools®. The #523 Adjustable Trammel is ideal for transferring measurements, scribing arcs and drawing large circles. It accurately measures and marks distances beyond range of conventional compasses and...
    Included eccentric points can be replaced by pencils, ballpoint pens, crayons or soapstone sticksFine adjusting screw for point setting
    $31.54
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Angle-izer™ 0° to 180° Plastic Dial Gauge Protractor
    General Tools® - Angle-izer™ 0° to 180° Plastic Dial Gauge Protractor (29)
    0
    # mpn4653583799
    Angle-izer™ 0° to 180° Plastic Dial Gauge Protractor by General Tools®. The Plastic Protractor facilitates measurement and marking of inside, outside and sloped angles. It is ideal for construction jobs, cabinet-making and fine...
    Inside, Outside or Sloped Angles - this plastic protractor/angle finder measures inside, outside and slope anglesFour-Piece Design - with brass lock nut
    $5.46
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Angle-izer™ 0° to 180° Stainless Steel Dial Gauge Protractor
    General Tools® - Angle-izer™ 0° to 180° Stainless Steel Dial Gauge Protractor (17)
    0
    # mpn4653583557
    Angle-izer™ 0° to 180° Stainless Steel Dial Gauge Protractor (17) by General Tools®. The head makes it possible to anchor the protractor against objects to hold it in place as you take measurements. Square Head Protractor is an...
    Square head makes it possible to anchor the protractor against objects to hold it in place as you take measurementsDeeply etched graduations read from 0° to 180° in forward and reverse directions and will not wear or rub off
    $12.76
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Angle-izer™ 0° to 360° Stainless Steel Digital Gauge Protractor
    General Tools® - Angle-izer™ 0° to 360° Stainless Steel Digital Gauge Protractor (823)
    0
    # mpn4699234739
    Angle-izer™ 0° to 360° Stainless Steel Digital Gauge Protractor (823) by General Tools®. Angle-izer® Digital Angle Finder can measure interior and exterior angles quickly and accurately. This product is made of high-quality...
    Lock and reverse-angle modesJumbo LCD
    $31.53
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Angle-izer™ 8" Stainless Steel T-Bevel/Angle Finder
    General Tools® - Angle-izer™ 8" Stainless Steel T-Bevel/Angle Finder (828)
    0
    # mpn4653583845
    Angle-izer™ 8" Stainless Steel T-Bevel/Angle Finder by General Tools®. Take the guesswork out of angles and cuts! The #828 Digital Sliding T-Bevel can measure, set and transfer interior and exterior angles quickly and accurately. It...
    Large LCDFour control buttons provide five functions: Power on/off, Reading hold, Read reverse angle, Flip display, Clear readout
    $31.14
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Brass Stair Gauges
    General Tools® - Brass Stair Gauges (803)
    0
    # mpn4653583832
    Brass Stair Gauges by General Tools®. The Stair Gauge Set speeds and improves the quality of repetitive work, including making angle cuts on rafters and stair stringers.
    Fast and Uniform Layouts - Speed up any measuring job, with better accuracy! Ideal for repetitive work such as cuts on rafters, stringers, or any type of stairway workUniversal for any square - Easily clamps to any metal framing, rafter or carpenter squares. An essential woodworking tool - no square should be without a set
    $5.66
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Deburring Tool
    General Tools® - Deburring Tool (482)
    0
    # mpn4653583598
    Deburring Tool (482) by General Tools®. If you’re looking for a reliable solution to complete your project, this 1st-grade product is right up your alley. Designed utilizing the finest materials, it delivers unmatched levels of...
    DEBURR ROUGH EDGES - Use tool to remove leftover burrs from cut pipe, tubing, conduit, and PVC tubingALUMINUM HANDLE with SWIVEL HEAD- swivel head deburring tool delivers equivalent performance and quality as higher priced deburring tools without the price tag
    $11.66
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Drill Bit Grinding Attachment
    General Tools® - Drill Bit Grinding Attachment (825)
    0
    # mpn4653583844
    Drill Bit Grinding Attachment by General Tools®. The #825 Drill Bit Grinding Attachment can hone drill bits to their original sharpness, extending their life and improving drilling accuracy.
    Includes table for translating the overhang requirement to the correct point angle for the target materialAutomatically adjusts to the correct clearance angle
    $24.62
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Heavy-Duty Retractable Utility Knife Kit (4 Pieces)
    General Tools® - Heavy-Duty Retractable Utility Knife Kit (4 Pieces) (855)
    0
    # mpn4653583858
    Heavy-Duty Retractable Utility Knife Kit (4 Pieces) by General Tools®. Utility Knife is ideal for cutting and scoring wallboard, cardboard, roofing shingles, linoleum, carpet, veneers and other materials. This product is made of...
    Three cutting depthsBlade retracts into handle for safety
    $7.23
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - LCD Pin-Type Moisture Meter
    General Tools® - LCD Pin-Type Moisture Meter (MMD4E)
    0
    # mpn4653583696
    LCD Pin-Type Moisture Meter by General Tools®. Get precision data that will help you identify potential issues in your nonelectriclal equipment with this nonelectrical properties testing reliable testing device. Used for testing,...
    Wood/building materials selection switchLow, medium and high moisture tones and on-screen icons
    $44.44
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Non Contact Infrared Thermometer (-4°F to 608°F)
    General Tools® - Non Contact Infrared Thermometer (-4°F to 608°F) (IRT207)
    0
    # mpn4653583691
    Non Contact Infrared Thermometer (-4°F to 608°F) by General Tools®. The M12™ 102 x 77 Infrared Camera is the first imager in its class to deliver oustanding 7,800+ pixel image detail for superior scanning than single-point infrared...
    Thermometer has a backlit LCD display fromPrecision thermometer has a large range of measurement
    $41.10
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Precision Knife Blades for 1901 Knife (5 Pieces)
    General Tools® - Precision Knife Blades for 1901 Knife (5 Pieces) (1920)
    0
    # mpn4677141957
    Precision Knife Blades for 1901 Knife (5 Pieces) by General Tools®. This top-grade product is expertly made in compliance with stringent industry standards to offer a fusion of a well-balanced design and high level of craftsmanship....
    Expertly manufactured from the highest grade materialsMade for maximum safety and convenience
    $3.56
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Pro Doweling Kit
    General Tools® - Pro Doweling Kit (840)
    0
    # mpn4699234582
    Pro Doweling Kit by General Tools®. By assuring alignment of dowel holes and pins, the #840 Pro Doweling Kit helps create professional-quality edge-to-edge, right-angle and edge-to-surface joints that can be press-fit or glued.
    Different drilling positions for 1/4", 5/16" and 3/8 " stockSteel stops adjust the depth of the cut
    $34.73
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Replacement Steel Hose and Pipe Cutter Blade for #115 Hose and Tubing Cutter
    General Tools® - Replacement Steel Hose and Pipe Cutter Blade for #115 Hose and Tubing Cutter (115B)
    0
    # mpn4699235497
    Replacement Steel Hose and Pipe Cutter Blade for #115 Hose and Tubing Cutter by General Tools®. This product is made of high-quality materials to serve you for years to come. Designed using state-of-the-art technology and with customers...
    Designed to help to get your job done rightManufactured utilizing the highest quality materials
    $5.62
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Scanning Infrared Thermometer with Tricolor Light Panel (-40°F to 428°F)
    General Tools® - Scanning Infrared Thermometer with Tricolor Light Panel (-40°F to 428°F) (IRTC50)
    0
    # mpn4653771949
    Scanning Infrared Thermometer with Tricolor Light Panel (-40°F to 428°F) by General Tools®. Get precision data that will help you identify potential issues in your nonelectriclal equipment with this nonelectrical properties testing...
    In scanning mode, the color of the light panel and the beeper speed indicate whether the target is above, within or below the reference temperatureChoice of three setpoint bandwidths 1°, 5° and 10°F (0.5°, 3°, 5.5°C)
    $54.94
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Triangular Scraper
    General Tools® - Triangular Scraper (478)
    0
    # mpn4653583809
    Triangular Scraper by General Tools®. The #478 Triangular Scraper is ideal for scraping, trimming and deburring metals, tubing and other materials. This top-grade product is expertly made in compliance with stringent industry standards...
    Hardened and tempered triple-edge blade is secured in wood handle by steel ferruleHollow ground cutting edges stay sharp longer and resharpen easily
    $8.16
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Ultratest™ 12" (300 mm) SAE/Metric Flexible Steel Ruler
    General Tools® - Ultratest™ 12" (300 mm) SAE/Metric Flexible Steel Ruler (CF1247ME)
    0
    # mpn4653583684
    Ultratest™ 12" (300 mm) SAE/Metric Flexible Steel Ruler (CF1247ME) by General Tools®. With 32nds of an Inch Graduations. The #CF1249MD Ultratest™ Flexible Steel Rule with 10ths of an Inch Graduations can make very precise...
    Ultra-fine black graduationsHard satin chrome finish
    $13.90
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Ultratest™ 24" SAE Flexible Steel Ruler
    General Tools® - Ultratest™ 24" SAE Flexible Steel Ruler (CF2445)
    0
    # mpn4698087223
    Ultratest™ 24" SAE Flexible Steel Ruler (CF2445) by General Tools®. Whether you're a keen DIYer or a pro, this practical tool is great to have at hand in your toolbox. Designed with key attention to detail, it will let you carry out...
    Ultra-fine black graduationsHard satin chrome finish
    $32.66
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Up to 18 lb Alnico Pot-style Magnet
    General Tools® - Up to 18 lb Alnico Pot-style Magnet (374C)
    0
    # mpn4632015994
    Up to 18 lb Alnico Pot-style Magnet (374C) by General Tools®. With 1/4-20 Hole. Alnico Pot-style Magnet with 18 Lb. Pull is ideal for lifting, holding, sorting, clamping and retrieving steel or iron parts.This product is made of...
    High quality at an affordable priceExpertly made from premium materials
    $12.82
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - 5x Eye Loupe
    General Tools® - 5x Eye Loupe (527)
    0
    # mpn4699234577
    5x Eye Loupe by General Tools®. The #527 5X Eye Loupe is ideal for toolmakers, jewelers, instrument makers and other craftsmen needing sharp magnification without eyestrain. If you’re looking for a reliable solution to get your job...
    Optical-quality (ground and polished) clear glass lensDesigned to help you get your job done right
    $7.24
    In Stock - Ships in 24 to 48 hrs
  • General Tools® - Angle-izer® 10" Contour Gauge, Profile Gauge, Shape Duplicator
    General Tools® - Angle-izer® 10" Contour Gauge, Profile Gauge, Shape Duplicator (833)
    0
    # mpn4699235499
    Angle-izer® 10" Contour Gauge, Profile Gauge, Shape Duplicator by General Tools®. The 833 Angle-izer® 10 in. Contour Gauge, can duplicate any shape instantly. This profile gauge creates an instant template for curved and odd shaped...
    PRECISE SHAPE DUPLICATION- Easily copy any shape or duplicate a profile exactly for woodworking or tile flooring/linoleum installation where you want to replicate the shape of moldings or match cut outs around door casings and pipesPERFECT PROFILES- 3" (76mm) deep fingers will measure profiles up to 1-1/4" (32mm) precisely record the cross-sectional shape of a surface
    $15.61
    In Stock - Ships in 24 to 48 hrs




General Tools & Instruments LLC, began as the brainchild of Abe and Lillian Rosenberg in New York City, 1922. Originally dubbed General Hardware Manufacturing Co., the company specialized in the wholesale of "hard goods," offering a full-range of domestic and professional items from clothesline pulleys and screen-door hardware, to specialty hand tools. However it wasn't long before Abe, a former WWI soldier and a vibrant, creative thinker, began to conceptualize his own product ideas. With Lillian running the store, Abe would take the Fall River Line from Greenwich Village to New England in search of machine shops to manufacture his tools.

By 1930 he had outsourced a small line of specialty items, including circle cutters, metal punches and pocket screwdrivers. By 1937, Abe and Lillian were selling their own products exclusively at General Hardware. Abe continued to develop a line of useful products for both consumer and commercial purposes. His thirst for new ideas kept General at the forefront of the industry and, accordingly, the company became one of the first to build die-cast tools. Through Lillian's keen business management, the company was awarded contracts supplying machinist tools to the United States Military and the British Purchasing Commission during WWII. In 1946, General became a charter member of the Sears 100 Club of Craftsman tool suppliers.

Upon Abe's death in 1977, his daughter Dorothy became Chairman of the Board. Along with her husband, Seymour Weinstein, Dorothy expanded General's product line to include precision measuring tools and other specialty hand tools. In 1990, the company's name was officially changed to General Tools to better reflect its product line. General has expanded its product line to include electronic testing and measurement equipment, fueled by the much-heralded acquisition of Mannix Instruments in November of 2006. The company, now General Tools and Instruments LLC, continues to forge a path into the digital marketplace all the while holding true to the entrepreneurial spirit upon which it began.