Product Details
3/8" Air Rivet Gun (256) by Huck®. The Model 256 tool is designed for high-speed production applications, able to install up to 20 fasteners per minute. Because it has slightly more swaging power than the Model 255, the 256 is able to install up to 3/8" steel Magna-Grip fasteners. The tool provides optimum stroke for one-cycle installations, and features a concentric (inline) pull piston and new front gland design, allowing for easy piston removal. The 256 is factory-tested for 2000 cycles, ensuring the tool's reliability, and plated piston rods extend seal life, adding to its durability. This proven production tool weighs only 11.1 pounds.
Specifications
| Length of Head: 7.820" (198.63 mm) |
| Air Pressure: 90 psi (6.20 bar) |
| Center to Edge: 0.959" (24.36 mm) |
| Weight: 11.1lb. (5.03kg) |
| Item: Pneudraulic Riveter |
| Speed/Cycles: 30 per min |
| Operating Temperature: 32 to 125 Deg F (0 to 51.7 Deg C) |
| Flow Rate: 22.4 scfm (634 lpm) |
| Cylinder Diameter: 6.125" (155.58 mm) |
| Pull Capacity: 9986 lb. at 90 psi (44.42 kN at 6.2 bar) |
| Noise Level: 85 dB(A) at 90 psi |
| Power Source: 90 psi Shop Air |
| Stroke: 0.875" (22.23 mm) |
| Fastener Type: 3/16", 1/4", 5/16", 3/8" |
Features
- Designed to help to get your job done right
- Manufactured utilizing the highest quality materials
- Built to provide exceptional levels of durability
Nappco Fastener Company was founded in 1969 and has four branches located in Houston, Austin, Dallas, and San Antonio, TX. Huck® goal is to provide you with quality products that are priced competitively. Huck team is experienced in the Huck rivet gun and Huck tool industry.