Product Details
5/16" Insulated Handle Hollow Shaft Nut Driver (646-5/16-ins) by Klein Tools®. Get those hard to reach nuts and bolts with Klein's full hollow shaft nut driver for long bolt applications. Its two layers of insulation protect against electric shock and is individually tested to exceed standards. The bright orange outer coating is flame and impact resistant. Its high-dielectric white inner coating is bonded to the tool for extra toughness.
Notes
- Only use tools that are marked with the official international 1000 V rating symbol shown above
- If there is any chance that the tools will make contact with an energized source
- Whenever possible, always de-energize lines and equipment prior to working on or around them
- Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source
- Do not touch uninsulated portion of the tool or any conductive object when either might contact an energized source
- Wear approved eye protection
- Because moisture, films and other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants
- Always inspect your tools before use
- Destroy tool if insulation becomes damaged in any way
Specifications
| Type: Standard |
| Unit of Measure: SAE |
| Tip Size (SAE): 5/16" |
| Rod Length: 6" (15.2 cm) |
| Overall Length: 9-3/4" (24.8 cm) |
| Tip Style: Nut Driver |
| Properties: Hollow Shaft |
| Handle Type: Insulated |
| Weight: 3.2 oz (91 g) |
| Quantity: 1 Piece |
| Meets or Exceeds the Following Specifications: IEC 60900, ASTM F1505 |
Features
- Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
- Two layers of insulation provide protection against electric shock
- Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool with a flame retardant, impact-resistant, bright orange outer coating
- Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications
- Tip-Ident quickly identifies nut driver size
- Cushion-Grip handles for greater torque and comfort
- Made in USA
Since 1857, Klein Tools® has been manufacturing top-grade tools in America, and it’s as important for the Klein family to keep that tradition now, as it was more than 150 years ago. Operated by Mathias Klein and his descendants to the fifth generation, the company has grown and developed along with the telecommunications and electrical industries where Klein pliers first found major usages. Today, Klein Tools, Inc. represents much more than Klein pliers. The company's product line has broadened to include virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields. Moreover, Klein is the only major tool manufacturer worldwide focused on electrical and utility applications. No other manufacturer of hand tools and related products used in electrical applications makes more products in America than Klein Tools.