Product Details
500 Series™ 0 to 6" SAE and Metric Steel Digital Absolute Aos Caliper (500-171-30) by Mitutoyo®. Mitutoyo's absolute Digimatic Caliper is the next generation of electronic calipers. It keeps track of its origin point once set. Whenever turned on, the large LCD displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology, as well as no more concern for over speed errors.
Specifications
| Measuring Range: 0 to 6" (0 to 150 mm) |
| Increments: 0.0005" (0.01 mm) |
| Type: Digital |
| Display: LCD |
| Material: Hardened Steel |
| Units Of Measuring: SAE and Metric |
| Accuracy: +/- 0.001" |
| SPC Output: Yes |
Includes
- Digital Caliper
- Plastic Case
Features
- New electromagnetic inductive (AOS) sensor
- Large and clear LCD readout
- The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point)
- Data Hold Unit (959143) is optional
- Carbide-tipped jaw type calipers are also available
- With thumb roller. Except 500-500-10, 500-501-10,500-502-10
- Supplied in fitted plastic case. Except 1000mm / 40" supplied in wooden case
- Made in Japan
Technical Data:
Accuracy: Refer to the list of specifications
Resolution: 0.01mm or .0005"/0.01mm
Repeatability: 0.01mm / .0005"
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type
linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3.5 years under normal use
Function
Origin-set, Zero-setting, Data output, inch/mm conversion
(inch/mm models ONLY)
Alarm: Low voltage, Counting value composition error
Optional Accessories
959143: Data hold unit
959149: SPC cable with data switch (1m / 40")
959150: SPC cable with data switch (2m / 80")
The world's largest metrology company Mitutoyo® was founded in 1934 by Yehan Numata with one product - the micrometer. Mitutoyo's philosophy at that time was to make the best mechanical micrometer in the world. But also to produce them in quantities that made them affordable and available to all of manufacturing so they could improve the quality of the products they manufactured. This philosophy was expanded in the next several decades to include a wider product offering focused on mechanical, dimensional gaging products. Mitutoyo focused its R&D and production efforts on creating the most advanced micrometers, calipers, indicators and other measurement tools in the world.