Product Details
543 Series™ 0 to 0.5" SAE and Metric Digital Absolute Standard Type Indicator (543-406B) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
Specifications
| Measuring Range: 0 to 0.5" (0 to 12.7 mm) |
| Increments: 0.0005" (0.01 mm) |
| Type: Digital |
| Display: LCD |
| Units Of Measuring: SAE and Metric |
| Accuracy: 0.001" |
| Contact Point Material: Hardened Steel |
| Ip Rating: Ip42 |
| SPC Output: Yes |
| Measure Force: 0.2N to 0.5N |
| Stem Diameter: 3/8" |
| Thread: #4-48 UNF |
| Back Type: Flat |
| Model: ID-C1012CEX |
| Types: Iso/Jis |
| Remarks: Low Measuring Force |
| Power Supply: Sr44 Battery |
| Battery Life: Approx. 5,000 Hours Under Normal Use |
Features
- Large, easy-to-read LCD
- GO/±NG judgement is performed by setting the upper and lower tolerances for max., min. and runout values
- Internal calculations using the simple formula of [F(x)=Ax)] are available
- Similar in size to Series 2 dial indicators
- As compact as standard Series 2 dial indicators
- GO/±NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/±NG) can be displayed in full-size characters
- The positive/negative count resulting from the spindle's up/down movement can be toggled
- Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle "Absolute Position" from the origin at power-on. Also unlimited response speed eliminates over-speed errors
- The ID-C indicator face can be rotated 330° to an appropriate angle for easy reading
- With SPC data output
- Made in Japan
The world's largest metrology company Mitutoyo® was founded in 1934 by Yehan Numata with one product - the micrometer. Mitutoyo's philosophy at that time was to make the best mechanical micrometer in the world. But also to produce them in quantities that made them affordable and available to all of manufacturing so they could improve the quality of the products they manufactured. This philosophy was expanded in the next several decades to include a wider product offering focused on mechanical, dimensional gaging products. Mitutoyo focused its R&D and production efforts on creating the most advanced micrometers, calipers, indicators and other measurement tools in the world.