FAQ

Which Quick Release Hub fits my vehicle?

Trick answer, ANY quick release will fit your vehicle (as long as the vehicle is equipped with a Short Hub Adapter). The Quick Release is not a hub in itself, and must be installed in addition with a Short Hub Adapter. The Short Hub Adapter is the only vehicle specific part in NRG entire Quick Release kit.

Will my _____ function work with a Quick Release installed?

The Quick Release has built in pick-ups for horn contacts, making custom horn wiring simple and clean. Most of NRG hub adapters feature a floating brass contact on the underside, allowing constant contact regardless of steering wheel angle. Traction control, volume control, or any other features powered by the clock-spring will be disabled. Reinstallation of the factory steering wheel will revive these options if necessary.

I have a ______ light on my dash after installing my Quick Release kit.

Some vehicles require the removal of the factory “clock-spring” for installation. The “clock-spring” is kept out of the vehicle after installation, which may disable vital factory functions such as Traction Control, VSC, ABS, Electronic Power Steering, Airbags, or more. Your Short Hub Kit (not offered for all makes/models) may provide you with 2x 2ohm resistors, these are to be installed into the SRS harness, and will counteract any adverse effects of the installation.

How far will be steering will stick out after I install my Quick Release?

This is highly dependent on steering wheel choice. We offer wheels in depths from 1” to 3” deep, this will have the biggest impact on steering wheel position. With the use of NRG Short Hub Adapter, the quick release only adds 2.5” to the steering column, making the effective length from 3.5-5.5”. Taking measurements prior to your purchase will ensure that you have proper wheel placement.

How do I know which product fits my vehicle?

A good majority of NRG products are universal, and can be installed on most vehicles without any trouble. However, some of products are vehicle specific, for these items you will need to look in the Product Application Guide for that particular part.

Do they sell Quick Release components separately?

While you can purchase each piece of a QR kit individually (Quick Release, Short Hub, Steering wheel) they do not offer components of any of the 3 items separately. Meaning you can not buy just the bottom or top half of the Quick Release, or Short Hub.

I don’t see my vehicle listed, can I still use a Quick Release?

If your vehicle is not listed in Short Hub Adapter Fitment Guide, there’s a good chance that you can still use patented NRG Quick Release. All that is needed to install a Quick Release is a standard 70mm, 6 hole adapter. Please do your research, and verify fitment before purchase, as NRG are not responsible for an incompatible group of products.

I installed my Short Hub and Quick Release, but now my steering wheel is off center.

It is likely that the Short Hub was clocked a few degrees to the left, or right during installation. Simply remove the Short Hub, following standard factory service manual procedure, and adjust accordingly.